This is an oil pipe made specifically for the Merlin powered Spitfire. These are darted 1944 but with a 300 number were unmodified from the MK I through to the MK IX.

They are old new stock and still supple they have some very light surface corrosion on the collars but the attachments are like new. They cannot be used for flying at least in the UK but would be perfect for static running.

In original condition and packaging.

Approximate length is 42 1/2"  or 108cm

Ref No: 30047/37

12/44  24618

Click on pictures to enlarge

   £75  each

Shipping overseas is expensive in its original packaging but would be reduced by removing the packaging please contact US for a quote

Several available

This is an exhaust valve from a MK II Hurricane fitted with a Merlin XX engine number 54767.

The Russian front was probably the most brutal conflict of WWII. Hurricanes were supplied by Britain to Russia via the treacherous Arctic convoys. Once in Russia the Hurricanes were rearmed using Russian armaments,

This was 3 days after the 163-day Battle of Stalingrad had ended after the last of the German Sixth Army forces surrendered.

This is an amazing and poignant peace of history considering its journey through the Artic in winter to the most brutal front in WWII a small but essential part in the fight against fascism.

We have small number of peaces the valve spring in place from the same aircraft shown above which will be sent with the valves as stocks last .

 Shown above a Russian Hurricane supplied by the British

   £65 each

This is a inlet valve from a MK II Hurricane fitted with a Merlin XX engine number 54767.

 Shown above a Russian Hurricane supplied by the British

We have small number of peaces the valve spring in place from the same aircraft shown above which will be sent with the valves as stocks last .

Here is an exhaust stub from the legendary Mosquito.

Made by the Lancefield coach works exhaust manufacturers.

Click on pictures to enlarge

The wooden wonder the Mosquito a British twin-engine two-seat aircraft The Mosquito had a frame of wood and a skin of plywood, and it was glued and screwed together in England, Canada, and Australia.  Designed in 1938 and entered service in 1941.

As a night fighter, the Mosquito downed more than 600 Luftwaffe planes over Germany and as many V-1 missiles ( over England and the English Channel. As a bomber, it proved able to carry twice the bomb load for which it was designed. The Mosquito had a maximum speed in excess of 400 miles (640 km) per hour and a range of more than 1,500 miles (2,415 km) with a 4,000-pound (1,816-kg) bomb load.

 Its original armament included four .303-calibre machine guns and four 20-mm cannons, all firing through the nose. The Mosquito served as a bomber, fighter, night fighter, high-altitude fighter, and photo-reconnaissance .

  £295

Here is an exhaust stub from the legendary Mosquito.

Made by the Lancefield coach works exhaust manufacturers.

Click on pictures to enlarge

The wooden wonder the Mosquito a British twin-engine two-seat aircraft The Mosquito had a frame of wood and a skin of plywood, and it was glued and screwed together in England, Canada, and Australia.  Designed in 1938 and entered service in 1941.

As a night fighter, the Mosquito downed more than 600 Luftwaffe planes over Germany and as many V-1 missiles ( over England and the English Channel. As a bomber, it proved able to carry twice the bomb load for which it was designed. The Mosquito had a maximum speed in excess of 400 miles (640 km) per hour and a range of more than 1,500 miles (2,415 km) with a 4,000-pound (1,816-kg) bomb load.

 Its original armament included four .303-calibre machine guns and four 20-mm cannons, all firing through the nose. The Mosquito served as a bomber, fighter, night fighter, high-altitude fighter, and photo-reconnaissance .

  £295

Here is an exhaust stub from the legendary Mosquito.

Made by the Lancefield coach works exhaust manufacturers.

Click on pictures to enlarge

The wooden wonder the Mosquito a British twin-engine two-seat aircraft The Mosquito had a frame of wood and a skin of plywood, and it was glued and screwed together in England, Canada, and Australia.  Designed in 1938 and entered service in 1941.

As a night fighter, the Mosquito downed more than 600 Luftwaffe planes over Germany and as many V-1 missiles ( over England and the English Channel. As a bomber, it proved able to carry twice the bomb load for which it was designed. The Mosquito had a maximum speed in excess of 400 miles (640 km) per hour and a range of more than 1,500 miles (2,415 km) with a 4,000-pound (1,816-kg) bomb load.

 Its original armament included four .303-calibre machine guns and four 20-mm cannons, all firing through the nose. The Mosquito served as a bomber, fighter, night fighter, high-altitude fighter, and photo-reconnaissance .

  £295

Click on pictures to enlarge

Merlin Exhaust stub, has some corrosion and has been patched and filled with liquid metal still a nice display peace.

Fitted to the MK XIV Spitfire onwards , Seafire and Firefly

L 307

Click on pictures to enlarge

Out of stock more wanted contact me

Beautiful brass rivet tool. This is an original wartime tool just recently unwrapped from its greaseproof paper.

Possible ref no's read AML8971 but not clear

Click on pictures to enlarge  

£75

Fits spark plug as shown below:

BK14988

This is a superb wartime Rolls Royce spark plug extension tool for tightening and removing spark plugs on Rolls Royce piston engines. As you can see in the picture it fits perfectly around a period spark plug. If you enlarge the picture you can clearly see Rolls Royce written on it, this is a quality tool and if you have ever tried to remove a spark plug from a Merlin you will know its invaluable. Until recently this was wrapped in thick grease so its like new.

Click on pictures to enlarge

£175

(Spark plug not included)

Once again this Merlin generator looks in excellent condition. Turns and is sealed and would appear to be serviceable, subject to relevant checks.

Click on pictures to enlarge

This item is heavy. Buyers contact us for postage costs

Above an extract from a Merlin XX parts manual.

Merlin Valve Rocker (No 59 pg 1 PWR)

This is a Merlin Valve Rocker.

DW 95

87893

Click on pictures to enlarge

 Multiples available

£35 each

Merlin Valve Rocker -Presented on oak wood mount (No 58 pg 1 PWR)

Rev Counter (No 57 pg 1 PWR)

This is a rev counter made by Smiths

Serial No 75998/1  

Code 2 ERC

70875 - 1

Click on pictures to enlarge

Click on pictures to enlarge

 Merlin Part (No 56 pg 1 PWR)

D2119

D2119F

Click on pictures to enlarge

Click on pictures to enlarge

 Merlin Valve New (No 55 pg 1 PWR)

These appear to be old new stock unused Merlin Valves we have four available. There are used ones listed lower down on this page.

Click on pictures to enlarge

 Mk.1 Spitfire BTH Type AS-3 Starting Magneto (No 54 pg 1 PWR)

Here is an original Starting Magneto. This magneto was removed from a Mk.1 Spitfire.

They were also used in early engines such as the Genet Major.

British Thomson-Houston (BTH) was a British engineering and heavy industrial company, based at Rugby, Warwickshire, England and founded as a subsidiary of the General Electric Company (GE) of Schenectady, New York USA. They were known primarily for their electrical systems and steam turbines.

37ACX52275

R82792

82792

Click on pictures to enlarge

Click on pictures to enlarge

Spitfire Merlin Brass Oil separator (No 53 pg 1 PWR)

This piece is made from solid brass and fitted to the firewall of the Spitfire in used condition and dirty but should be serviceable after a good clean.

This is an oil separator that is installed on the output plumbing of a vacuum pump. It is intended to collect oil vapour from the vacuum pump and return it to the engine interior. Stops loss of oil and smearing of aircraft with oil vapour.

Seen in situ above mounted on the Spitfire firewall

3 available in similar condition.

Click on pictures to enlarge

£1200

Rolls Royce Griffon Header Tank (No 52 pg 1 PWR)

Here is an original Griffon header tank in excellent condition, it looks to be fully serviceable subject to the required checks.

The successor of the great Merlin engine, the Rolls-Royce Griffon played its part in helping to win the Second World War when it was fitted to iconic warbirds such as the Spitfire and Seafire.

Griffon development began in response to a request from the Fleet Air Arm of the Royal Navy in 1938. Navy aircraft tend to be larger and heavier than their land-based counterparts; this obviously puts greater demands on the engine if performance is to be maintained.

To meet this demand, Rolls-Royce went back to the concept of the Schneider Air Racing Trophy “R” engine.

The Griffon, essentially a modernized Merlin, is a 60 degree V-12 with 2239 cu. in. displacement (the same parameters as the “R” and 36% greater displacement than the Merlin while having an only slightly larger frontal area.)

However, this was a totally new engine, featuring many design updates and improvements over the Merlin.

Click on pictures to enlarge

Seen above the header tank in situ in a Spitfire this tank was removed from an Avro Shackleton

Click on pictures to enlarge

Vickers Wellington Air Intake (No 51 pg 1 PWR)

Click on pictures to enlarge

R985 Wasp Junior ignition Harness (No 50 pg 1 PWR)

This is an ignition harness from an R985 Aero engine and appears to be old new stock although I offer no guarantee that it works..

These engines powered the Avro Anson and Airspeed Oxford along with dozens of other aircraft types, many of which are still in use today.

Out of stock more required please contact me

Click on pictures to enlarge

£595

R3350 Duplex Cyclone ignition Harness (No 49 pg 1 PWR)

This is an ignition harness from an R3350 Aero engine and appears to be old new stock although I offer no guarantee that it works..

The Wright R-3350 was a twin-row, 18-cylinder radial engine that was developed from the Wright R-1820 Cyclone and was one of the most powerful radial engines produced in the United States. Work on the engine began in January 1936 and the first R-3350 was run in May 1937.

Development proceeded slowly due to the complex nature of the engine and concentrated effort on the Wright R-2600.

 It was similar in design to the company's R-2600 14-cylinder radial, sharing the same bore and stroke, but adding four more cylinders for additional displacement.

Development accelerated after the USAAC issued its requirement for a long-range heavy bomber in 1940 resulting in the Boeing B-29 Superfortress.

 A serious effort was made then made to get the engine into production and the R-3350 finally made its first flight in 1941.

Click on pictures to enlarge

Shown above the B29 Superfortress

The B-29 Superfortress revolutionized World War II-era bombers, enabling long-range missions over Japan. The "super bomber" could carry more payload and fly faster than the Army's B-17 or B-24 heavy bombers. The B-29 was also equipped with a pressurized interior, allowing crewmen to fly long distances in relative comfort. Two modified B-29s dropped atomic bombs on Hiroshima and Nagasaki, Japan, helping end the war in the Pacific. Another carried Chuck Yeager and the Bell X-1 rocket plane aloft for the first supersonic flight in 1947.

Click on pictures to enlarge

Merlin Con Rod (No 48 pg 1 PWR)

Here is an original Merlin con rod. we also have others available.

B24 Liberator Engine Mount (No 47 pg 1 PWR)

This is an engine mount from a B24 Liberator in good restored condition . This mount was purchased from an aircraft fitter who removed it from a Liberator based at Dunkeswell in Devon England. It is a superb piece in its own right but has the additional historical interest of having seen active service at Dunkeswell.

Bristol Sprockets (No 46 pg 1 PWR)

Click on pictures to enlarge

Bristol Engine Manifold (No 45 pg 1 PWR)

Here we have a carburettor manifold from a Bristol Mercury or Pegasus.

New old stock still in their unopened boxes LV6/MTII 294 Chains driving 374 x 54 links  Renold Coventry chain CTT6 VEH 1104/CB278 packed in 1952. I am afraid I have no idea what these chains were used in but stored in typical military packaging. If you can help please contact me.

Three boxed and one loose available

£55 each

New old stock still in their unopened boxes. French made transmission chain Ref 2N PAS 9525 Made for British use as the chain size is in inches.

 I am afraid I have no idea what these chains were used in. If you can help please contact me.

38" x 5/32

Five boxed and one loose available.

£35 each

New old stock engine vibration mounts for the Rolls Royce Griffon.

CN 8003

827

Eight available

£25 each

220 Volt oil heater. It has a nice A/M crown. I can only assume this is for preheating oil in big aero engines. Looks serviceable.

£25

Here we have a complete exhaust system for the Pratt and Whitley R-1830 "Double Wasp" Radial engine.

All these pieces have part numbers stamped on to them.

These are free from major rust problems and are completely original.

yce amp; Whitney R-1830 Twin Wasp was an American aircraft engine widely used in the 1930s and 1940s. Produced by Pratt & Whitney, it was a two-row, 14-cylinder, air-cooled radial design. It displaced 1,830 cu in (30.0 L) and its bore and stroke were both 5.5 in (140 mm). A total of 173,618 R-1830 engines was built, and from their use in two of the most-produced aircraft ever built, the B-24 bomber and DC-3 transport, more Twin Wasps may have been built than any other aviation piston engine in history.

R-1830 Twin Wasp at Duxford

This engine was used in a wide variety of ww2 aircraft such as

This item is heavy. Buyers contact us for postage costs

Click on pictures to enlarge

This is a Fishtail exhaust stub fitted to early Merlin variants, some surface rust but otherwise in good condition as can be seen from the pictures.

£175

Click on pictures to enlarge

This is a Fishtail exhaust stub fitted to early Merlin variants, some surface rust but otherwise in good condition as can be seen from the pictures.

£175

Click on pictures to enlarge

This is a Fishtail exhaust stub fitted to early Merlin variants, some surface rust but otherwise in good condition as can be seen from the pictures.

£175

This is a Fishtail exhaust stub fitted to early Merlin variants, some surface rust but otherwise in good condition as can be seen from the pictures.

£295

Click on pictures to enlarge

Here are four Merlin fishtail stubs in nice original condition. They have been used as they have carbon deposits inside but no corrosion.

They are being sold individually please send a supplementary email (email link here) telling me which one you would like to purchase using the top left picture.

They are numbered one to four from left to right. Number 1 the far left is the end cap or first stub.

If you buy more than one postage will be combined and you will get a refund for any over charge.

£190 each

Here we have some Rolls Royce Merlin valves. In straight clean condition.

We have a number of these available both inlet and exhaust as well as springs which vary slightly in appearance but will be from a Rolls Royce Merlin.

Please check individual photos for shape.

Click on pictures to enlarge

Six available

£55 each

Here we have a Griffin valve. In good original condition with a very slight bend to this one.

Please check individual photos for shape.

Click on picture to enlarge

£55

Here we have another Griffin valve. In good original condition.

Please check individual photos for shape.

Click on picture to enlarge

£55

Another Rolls Royce Merlin valve. In straight clean condition.

Please check individual photos for shape.

Click on picture to enlarge

£55

Another valve, with slight corrosion to this one.

Please check individual photos for shape.

Click on picture to enlarge

£55

Here we have another Griffin valve. In good original condition.

Please check individual photos for shape.

£55

Here we have a Rolls Royce Merlin . In very nice straight clean condition. We have a number of these available both inlet and exhaust as well as springs.

We have both inlet and exhaust valves which vary slightly in appearance so may not match the picture exactly but will be from a Rolls Royce Merlin.

These are complete with the springs but I do not have the piece that locks them in place hence the reason the are currently fixed with a zip tie, some other alternative could probably be found for display purposes.

Click on picture to enlarge

£65

Here we have a Rolls Royce Merlin Spark Plug .

They are in a good clean condition.

Multiples available

£35 each

This is a stunning vintage one off highly detailed hand made model in metal and wood of a three cylinder engine as used in the earliest aircraft . The model looks to be aged and is not a modern reproduction. The closest match I can find is an L3 designed and built by the Lawrence Aero Engine Corporation of New York.

Lawrance L-3 In 1914, engineer Charles L. Lawrance became interested in the development of air-cooled aircraft engines. After considerable research, the Lawrence Aero Engine Corporation of New York, New York, began to manufacture two-cylinder models on a small scale. These included the Models A-3 and N-2. The first of the three-cylinder designs was the Model B built originally in 1916. It was a three-cylinder radial engine with power ratings progressively improved from 35 to 60 hp. This led to a follow-on series of three-cylinder radials, the L-2, L-3, L-4, and L-5. Continuing the development of his air-cooled engine designs, Lawrance later developed his Model R and then the famous Model J series of engines. As a result of Wright Aeronautical acquisition by merger of the Lawrence Company in 1923, the J series were eventually designated Wright Whirlwinds.
The U.S. Army and Navy purchased a number of Lawrence L-2 engines, which developed 60 shp. The L-3 was an improved version of the L-2

Seen under an original

Lawrance L-3 Radial Engine

£275

This is an original cockpit engine data plate typically fitted to large numbers of 2^nd WW British aeroplanes, especially in the early war days.  They were usually riveted to the cockpit side, alongside the pilot.  Often found in Battle of Britain Hurricane and Spitfire wrecks, these are highly collectable as well as forming an essential addition to a restoration or display.

£225

English translation of the plate:

AIRPLANE DECOMPOSITION WEIGHT
Airplane without water
Airplane oil and water
Airplane navigation instruments
Airplane ammunition and weapons
Airplane safety equipment
Airplane radio and electric wires
Airplane radio equipment
Airplane Bombing equipment
Various
General equipment

£125

French Potez 54 Aircraft Data Plate (No 29 pg 1 PWR)

This is probably unique extremely rare plate taken from a French Potez aircraft shot down during the Spanish civil war
 

This two-engine aircraft was built by the French Potez company to fulfil a 1932 specification for a new reconnaissance bomber. Built as a private venture, this aircraft, designated the Potez 54, flew for the first time on 14 November 1933. Designed by Louis Coroller, it was intended as a four-seat aircraft capable of performing duties such as bomber, transport and long-range reconnaissance.

Their first combat was in the Spanish Civil War, where they were employed by the Spanish loyalist side. A poor design that was already obsolete just two years after its introduction, when confronted by the higher performance German and Italian planes of the same period, the Potez 540 proved itself a failure in Spanish skies during the Civil War and was labelled as 'Flying Coffin by Spanish Republican pilots In the late 1930s, these aircraft were becoming obsolete so they were withdrawn from reconnaissance and bombing duties and were relegated to French transport units. They were also employed as paratrooper training and transport aircraft. By September 1939 and the beginning of World War II, they had been largely transferred to the French colonies in North Africa, where they continued to function in transport and paratrooper service. Their role in even these secondary assignments was problematic given their poor defensive armament and vulnerability to modern enemy fighters. Following the French capitulation to Germany in June 1940, those Potez 540s still flying served the Vichy French air force mainly in the French overseas colonies. Most of these machines were retired or destroyed by late 1943.

Merlin 724 Engine Plate (No 28 pg 1 PWR)

 This is an original engine identification plate for the Merlin Mk 724 it has never been fitted and is new old stock. The Merlin 724 was a post war engine used in the North Star transport aircraft from 1946 to 1950 and was used as a civilian and military transport aircraft for the RCAF.

£175

Merlin XX Engine Plate (No 27 pg 1 PWR)

 This is an o(No 29 pg 1 PWR)Mk XX it has never been fitted and is new old stock.

The Merlin XX 1,480 hp (1,105 kW) at 3,000 rpm at 6,000 ft (1,829 m); two-speed supercharger; boost pressure of up to +14 psi; Used in Hurricane Mk.II, Beaufighter MK II Halifax Mk.II and Lancaster MK I bombers, and in the Spitfire MK III prototypes N3297 and W3237.

 First production Merlin XX, 4 July 1940.

£325

Glycol tank for a Bristol Beaufort (No 26 pg 1 PWR)

A glycol tank for a Bristol Beaufort in good original condition.

The Bristol Beaufort was one of a series of aircraft derived from the earlier Bristol Blenhiem.  It was designed in response to two Air Ministry specifications issued in 1935. M.15/35 called for a torpedo-bomber and G.24/35 for a general reconnaissance and bomber aircraft. The aircraft that became the Beaufort was the third Bristol aircraft submitted to these specifications. The first aircraft to be submitted to specification G.24/35 was the Bristol Type 149, which went on to be produced in Canada as the Bolingbroke and in Britain as the Blenheim Mk IV, for use as a light bomber.

£195

FW190 Exhaust Pipe (No 25 pg 1 PWR)

A Engine Exhaust Pipe from a German BMW 801 Radial engine.

This has an outer sleeve to protect the fuselage from the heat. The pipe itself is in a good condition however the outer sleeve has some dents as show in the photo.

This type of engine was commonly fitted to the FW190, JU88 and the ME264, as well as other Luftwaffe Aircraft.

£145

FW190 Exhaust Pipe Clip (No 24 pg 1 PWR)

 Engine Exhaust Pipe Clip from a German BMW 801 Radial engine.

This type of engine was commonly fitted to the FW190, JU88 and the ME264, as well as other Luftwaffe Aircraft.

Click on picture to enlarge

Two available

£35 each

This is a Hydraulic Oil Filter made by Vokes.

It has a dent and four small holes at the bottom.

As used on the Hercules engine.

This was recovered from the Arnhem area of Holland.

Advert for Vokes

Here we have an American made Ignition Booster Coil.

It is a Type VJR 24B5 manufactured by American Bosch.

It was used in American made engines with low tension magnetos such as the R-2800.

R-2800 Double Wasp

Here we have a compressor pump for a Merlin.

It is seized but makes a nice display item.

Here we have a compressor pump type B for a Merlin.

It is seized but makes a nice display item.

Here we have a 37J pump for a Merlin. It is seized and has been crashed but makes a nice display item . Lots of numbers and is Air Ministry marked.

H578

IHCM K1A  

37J/512

Here we have a Glycol Tank as used in the DH Mosquito. The metal is in good condition however there is a dent on one side of the tank.

The de Havilland DH.98 Mosquito was a British multi-role combat aircraft with a two-man crew that served during and after the Second World War. It was one of few operational front-line aircraft of the era constructed almost entirely of wood and was nicknamed "The Wooden Wonder".The Mosquito was also known affectionately as the "Mossie" to its crews. Originally conceived as an unarmed fast bomber, the Mosquito was adapted to roles including low to medium-altitude daytime tactical bomber, high-altitude night bomber, pathfinder, day or night fighter, fighter-bomber, intruder, maritime strike aircraft, and fast photo-reconnaissance aircraft. It was also used by the British Overseas Airways Corporation (BOAC) as a fast transport to carry small high-value cargoes to, and from, neutral countries, through enemy-controlled airspace. A single passenger could be carried in the aircraft's bomb bay, which was adapted for the purpose.

DeHavilland Mosquito

Here is a B3 Vacuum Pump as used on the Rolls Royce Merlin Engine.

When the War broke out, Rola opened a dispersal factory at Bideford in Devon, in the former garage of Messrs Elliot and Sons. Production for the war effort grew apace with the manufacture of the RAF B3 Vacuum Pump, several thousands of which were produced.

There is damage to one of the bolts as seen in the top picture.

Here we have a RR Merlin Engine part as seen in situ below.

This a coolant channel to help cool the engine.

There are cracks in this piece, so for a STATIC REBUILD ONLY.

Click on pictures to enlarge

This piece is straight with no visible corrosion

Part nos CH 616554 CU General

CH 616677

Here we have a Merlin two speed supercharger fitted to the Merlin from the MK XX onwards as you can see its in relic condition 5ut is very useful for a static rebuild or of coarse a great collectable in its own right.

The drive for improved high altitude performance gave rise to the Merlin X, the first mark to incorporate a two-speed supercharger in place of the previous single speed unit. The similar Merlin XX gained significant performance benefits from Stanley Hooker's work on improving the aerodynamic efficiency of the supercharger. The XX series and its developments primarily saw service on the Hurricane II and Mosquito in Fighter Command, as well as being widely used on a number of Bomber Command aircraft, notably the Mosquito, Lancaster, and Merlin Halifax.

This is a compressor for the Rolls Royce Merlin. On a Spitfire it powered the flaps, brakes and cocked the guns.

It is new old stock and wrapped in its original grease proof paper with its original box.

Seen under fitted to a MK V Spitfire.

Click on pictures to enlarge

Click on the pictures to enlarge

The Kestrel was a 700 hp (520 kW) V-12 aircraft engine from Rolls Royce, their first cast-block engine and the pattern for most of their future piston-engine designs most famously the Merlin. One key advance in the Kestrel was the use of a pressurized cooling system.

Increased availability of higher octane aviation fuel in the late 1930s allowed the engine to be boosted to higher power levels without suffering from ping, and the Kestrel eventually topped out at 1,050 hp in the XXX model of 1940.

This is a super rare probably unique supercharger from an early Rolls Royce Kestrel. This supercharger was saved from an engine that was broken for scrap in the 1970s and so is straight and has not been crashed. The vanes in the supercharger turn freely and it should be serviceable subject to the required checks.

Here we have an Original Tube Spanner for the Rolls Royce Merlin

It is in its Original Packing and Factory Grease

This Carries the RAF reference 36DD/18112

It Carries the Pt. No E.47804

Click on pictures to enlarge